Microphone test

Check your microphone using live signal levels and a waveform.

Direct browser observationProcessed locallyDevice access requires your permission

Preparing

Ready

The microphone opens only after Start and permission. Audio is processed on your device without recording or upload. Stop or leave the tab to end; maximum 60 seconds.

Your browser may ask for access when you select Start.

Digital RMS amplitude
—
RMS level (digital)
—dBFS
Digital peak amplitude
—
Samples near full scale (≥0.99)
—%
Browser audio sample rate
—Hz
Active analysis time
0s
Live input waveform
Live input waveform

No live samples. Start and allow microphone access to display data.

Signal levels are not physical loudness or a mic quality rating. If no signal appears, check mute, the selected input and noise-filtering settings.

How to use

Select Start, allow microphone access and speak into the mic. Stop ends the test; leaving the tab or reaching 60 seconds stops it automatically.

Methodology

Analyzes the input’s RMS level, peak and waveform without playback or recording.