Audio spectrum

View the frequency bands in live microphone audio.

Direct browser observationProcessed locallyDevice access requires your permission

Preparing

Ready

The microphone opens only after Start and permission. Audio is processed on your device without recording or upload. Stop or leave the tab to end; maximum 60 seconds.

Your browser may ask for access when you select Start.

Digital RMS amplitude
—
RMS level (digital)
—dBFS
Digital peak amplitude
—
Samples near full scale (≥0.99)
—%
Browser audio sample rate
—Hz
Active analysis time
0s
Strongest FFT bin (approx.)
—Hz
FFT bin spacing
—Hz
Live FFT spectrum
Live FFT spectrum

No live samples. Start and allow microphone access to display data.

Signal levels are not physical loudness or a mic quality rating. If no signal appears, check mute, the selected input and noise-filtering settings.

How to use

Select Start, allow the microphone and speak or make a sound. Observe the spectrum and strongest frequency; Stop ends the test.

Methodology

Uses FFT analysis to display frequency bands and the strongest bin. Detail depends on the audio sample rate.